Installing your License
Wing Pro requires a license in order to run, either a trial license obtained from Wing at startup, or a purchased license. If Wing is running without a license it displays the following dialog at startup:
From here, you can choose either to start a trial or activate a purchased license. Trials are for 10 days, with an option to extend twice for up to 30 days total (or more on request). Purchased licenses may either be permanent licenses for a particular major version of Wing, or annual licenses. The activation process for all of these is the same, except that for trial licenses you do not need to enter the license number since it is provided by Wing Pro.
Activating a License
The most convenient way to activate a license is to ask Wing Pro to connect directly to wingware.com (which it does via http, TCP/IP port 80):
If you're unable or unwilling to connect directly, you can go to http://wingware.com/activate in your browser or on another device and enter the license id and activation request number obtained from the license dialog (the second option in the above screenshot). You will be given an activation key which you can then enter into Wing's dialog box to complete the activation. This is exactly the same exchange of information that occurs when Wing Pro connects directly to wingware.com to obtain a trial license.
If activation fails, Wing will provide a way to configure an http proxy. Wing tries to detect and use proxies by default but in some cases they will need to be manually configured. Please ask your network administrator if you do not know what proxy settings to use. See also how to determine proxy settings.
If you run into problems or need additional evaluation time, please email us at sales at wingware.com.
Activating on Shared Drives
If Wing's User Settings Directory (where the license activation is stored) is accessed from several different computers, the license must be reactivated once on each computer. The resulting extra activations will be stored as license.act1, license.act2, and so forth, and Wing will automatically select the appropriate activation depending on where it is running.
A Vendor File (described below) can be used to automate activation on each additional computer.
Computer labs consisting of identical hosts mirrored from a master may accept a single activation of a license for all the hosts. This may be used for site licenses and free permanent educational use licenses as follows:
- Activate the license on the master host
- Move the license.act file from the User Settings Directory to the Wing installation directory (on OS X place it into Content/Resources within the application bundle)
- Mirror the activation to all the clones
Note that Wing's acceptance of a shared activation in this configuration in no way relieves you of the responsibility to pay for one license per user.
To make it easier to reactivate in a case where Wing is on a shared drive, and for computer labs where the above method does not work, you can store your license code in the file resources/vendor in your Wing installation, in the following form:
This file should go into the existing resources directory in the top level of your Wing installation (or on OS X, within Content/Resources/resources inside the application bundle). You will need to create the file if it does not exist.
Once this is done Wing will read this file at startup and try to automatically activate the license, prompting you only if the activation fails. If many activations are expected, you will need to contact Wingware to obtain additional activations for your license.
Obtaining Additional Activations
Deactivating a License
If you wish to deactivate and remove your license number from a machine, click License in Wing's About dialog box and then Deactivate. This will remove the license activation and quit Wing.
Note that this just removes your license number from the machine. If you are out of activations you will still need to follow the instructions in Obtaining Additional Activations above.